Naomi Starter FAQ: Last Updated 10/14/08

Frequently Asked Questions Technical Database
OldFoo

Post by OldFoo »

If you have a Capcom I/O and a Naomi Sun psu, you power the Capcom I/O through the Jamma psu. The Naomi is then powered by the Sun psu. You DO NOT connect the Capcom I/O power to the Naomi. This would probably cause the burn out you mentioned.
OldFoo

Post by OldFoo »

so i have a jamma cabinet....



i have the naomi 1 main board and the capcom i/o with a cartridge in there, hooked up to the main power supply just fine and it works



but im trying to get a GD rom in there now....



i have the sun power supply handy, the scsi cable and the power splitter cable....



how do i hook these all up? like where does the black/white cable coming out of the SUN power supply go? where do the 6 pin and 8 pin connectors from the main Naomi board lead to exactly? and how exactly does the power connect from the gd rom to....?



i read the guide and it's pretty helpful but just wanna make sure i don't blow this up!
OldFoo

Post by OldFoo »

Image



Hello everyone,

I have a question to propose.

There are no manuals on the jvs i / o? to know all the pinout?



Another question ...

the 2 connectors 4-pin (5volt)

5 pin connectors and the 2 (12volt) are in and out? left right? or are bridges?



very thanks
OldFoo

Post by OldFoo »

Andy has the pinout on his site. click here.
OldFoo

Post by OldFoo »

Can this get stickied please?
OldFoo

Post by OldFoo »

Thanks for the info, very helpful since im a total noob at this
Post Reply