Sega Lindbergh Yellow totally fails on me :-(

OldFoo · Post by **OldFoo** » Tue Jun 19, 2012 11:53 am

Hey there,

Yesterday i got this nice Afterburner Climax Cab :

then after i looked around in the Menu a bit i restarted the game and it went well for some minutes.

However suddenly the Game freezed, so i turned the power off and waited some minutes and powered it back on.

Then i got this :

After that the game started and i got this Screen :

Error 10 ...i thought ok then, let's turn the Power off again and restart the cab, i did so and what happend is this :

i did let the os install for over an hour but it stuck at "Phase 4"

I'm totally Clueless and a Lindbergh noob

What should i do?? :smt102

OldFoo · Post by **OldFoo** » Tue Jun 19, 2012 12:17 pm

i know little about Lindbergh but the first screen is complaining about a network interface it seems.

could be you need to do some simple cleaning of that part? if it is a separate part or replace that part. try cleaning first

OldFoo · Post by **OldFoo** » Tue Jun 19, 2012 12:38 pm

Thank you very much for your fast repy

i don't really understand what you mean by "cleaning" and wich part?

you mean cleaning like cleaning a dirty Surface with a cloth? or you mean more softwarebased?

OldFoo · Post by **OldFoo** » Tue Jun 19, 2012 12:50 pm

clean the board

OldFoo · Post by **OldFoo** » Tue Jun 19, 2012 12:59 pm

ok, and how do i do that best? with a Brush or so?

OldFoo · Post by **OldFoo** » Tue Jun 19, 2012 1:20 pm

first you need to identify what part is the network interface. then i would take that part off carefully. use remove any socketed chips making sure you not how they plugged back in. take alot of pics of the board all during this to make sure you know how to put back.

like most of the electronics scrubbing them with soap and water. scrub any connectors that are used. then shaking most of the water off. use a hair dryer to dry this completely.

you must make sure no water exists on the cleaned board.

reassemble

OldFoo · Post by **OldFoo** » Tue Jun 19, 2012 1:31 pm

seems pretty dangerous :smt085

OldFoo · Post by **OldFoo** » Tue Jun 19, 2012 1:42 pm

whats dangerous?

this is standard practice to do any fixes. ive fixed many things by just a cleaning.

OldFoo · Post by **OldFoo** » Tue Jun 19, 2012 1:44 pm

never Did that before... i'll give it a Try.

OldFoo · Post by **OldFoo** » Tue Jun 19, 2012 1:49 pm

make sure its completely dry. i beg you