Inner Housing connector for Astro City DC OUT 2 part #

OldFoo · Post by **OldFoo** » Sat Aug 08, 2009 7:48 pm

As in the heading, what is the inner housing connector (and pins) part numbers for the Astro City PSU DC OUT 2 plug, and which manufacturer makes them?

It's the 2x3 plug that appears unused in most Astro cabs, front row, far left.

OldFoo · Post by **OldFoo** » Sat Aug 08, 2009 8:00 pm

Have you got a reference/picture?

OldFoo · Post by **OldFoo** » Sat Aug 08, 2009 9:31 pm

This is as close as I could find. I don't have a camera, unfortunately.

It's the one above the "00" in the serial number on the PSU and behind the big black wire on the left, so you can't see it well.

OldFoo · Post by **OldFoo** » Sun Aug 09, 2009 9:18 pm

Here's a reference to the part I'm looking for (I think - it appears to have all the necessary features):

http://triplemoonstar.brinkster.net/seg ... ockid=1775

OldFoo · Post by **OldFoo** » Mon Aug 10, 2009 1:19 am

Can anyone verify (or deny) that this is the part?

http://www.tycoelectronics.com/catalog/ ... N=176274-1

OldFoo · Post by **OldFoo** » Mon Aug 10, 2009 5:12 pm

Yes. Don't forget the contacts, without them it's just a useless piece of plastic.

OldFoo · Post by **OldFoo** » Mon Aug 10, 2009 6:31 pm

Giz10p also sells these:

http://www.giz10p.co.uk/cabinet-parts/c ... d_225.html

Segashed as well:

http://triplemoonstar.brinkster.net/seg ... ockid=1775

OldFoo · Post by **OldFoo** » Mon Aug 10, 2009 7:28 pm

One can get free samples of these straight from the manufacturer as well.

Try this experiment - create an order on Giz10p for one of those connectors and associated pins. Put your shipping address as being in the US.