error 03 naomi I I NEED HELP

OldFoo · Post by **OldFoo** » Wed Apr 18, 2007 7:08 pm

hI EVERYBODY

I have a big problem with my naomi 1 board

i have 3 naomi 1 with error 03 ( black screen and error 03 )

i changed the EPROM ..it's the same , clean the board ..same too

i saw nothing on the web , only for error 01

i have another board wth this problem

black screen and nothing more ...no boot ...no error on the screen

please if someone have any ideas about this big problem please let me know

thanks

joao

OldFoo · Post by **OldFoo** » Wed Apr 18, 2007 11:47 pm

ERROR 03 is a communication problem between the Naomi and DIMM board.

This could be caused by any of the following:

a)Bent pin(s)

b)Loose board (DIMM)

c)Faulty DIMM

Possible secondary causes could be:

a)No usb connection (Funny things happen from this. :smt102)

b)Bad security chip connection

c)Bad SCSI connection (less likely)

There's plenty of causes, but since the error is showing up on different Naomi boards, it is most likely the DIMM that is the culprit.

Try opening and reseating everything in the DIMM module and see if this helps.

If your Naomi is giving a plain black screen, then there is either not enough power, partial power is present (for example, 12v but no 5v)

or the Naomi is dead. Sorry for the lack of good news. :smt110

OldFoo · Post by **OldFoo** » Thu Apr 19, 2007 3:07 pm

joshua3dg wrote:ERROR 03 is a communication problem between the Naomi and DIMM board.

This could be caused by any of the following:

a)Bent pin(s)

b)Loose board (DIMM)

c)Faulty DIMM

Possible secondary causes could be:

a)No usb connection (Funny things happen from this. :smt102)

b)Bad security chip connection

c)Bad SCSI connection (less likely)

There's plenty of causes, but since the error is showing up on different Naomi boards, it is most likely the DIMM that is the culprit.

Try opening and reseating everything in the DIMM module and see if this helps.

If your Naomi is giving a plain black screen, then there is either not enough power, partial power is present (for example, 12v but no 5v)

or the Naomi is dead. Sorry for the lack of good news. :smt110

thanks so much joshua3dg

that helped me so much now i need to find the problem .....and see if my boards are dead ( i hope not )

thanks again