Daytona USA pcb in Sega Rally stand up cab ?

OldFoo · Post by **OldFoo** » Wed Nov 15, 2006 4:46 pm

Hi !

Can i exchange a sega rally pcb easily to a daytona usa pcb ?

Are there any differences in the wiring loom / filterboard ?

Greetings

RFK

OldFoo · Post by **OldFoo** » Thu Nov 16, 2006 9:39 am

Daytona is all different to Rally, different wiring, external I/O and sound board.

OldFoo · Post by **OldFoo** » Thu Nov 16, 2006 1:49 pm

Wohooo !

Damn, so i need a complete daytona kit and i have to make a new wiring loom.

Thanx for the information.

BTW: Which rom boards can i use in my virtua fighter 2 dedicated cab...as i remember right only model 2 a crx boards?

As i got my house of the dead kit i wanted to exchange the pcb with my virtua fighter 2 pcb...hohohoh...no chance. So i modified the wiring loom to use the pcb on my astro city cab.

Incredible game ! One of the best of the saga if you ask me.

Greetings

RFK

OldFoo · Post by **OldFoo** » Thu Nov 16, 2006 4:04 pm

You can only used 2ACRX rom boards on 2A and so on

V Cop 1 is a model 2 (basic version)

Virtua Cop 2 is a Model 2A - double layer pcb assembly plus a 3rd layer ROM

board.

The next board system was model 2B - no gun games here - here the double layer

board was combined onto one pcb and it had an additional ROM pcb. Different

memory map to the 2A

Finally - there was the 2C - house of the dead - similar config to 2B but

slightly different - different memory map

The 4 sets are not compatible with each other - the MASK roms can be used on

different boards where supported, but the EPROM versions (prog code) are

different for each version.

OldFoo · Post by **OldFoo** » Thu Nov 16, 2006 5:37 pm

Thank you very much for the information.

Greetings

RFK

PS: Do you know how to make a wiring loom for a time crisis pcb ?

I think it must be a super system 22 pcb made by namco.