A friend recently gave me as a present an old twin cabinet , Outrunners from 1992 and i would like to convert it to the JVS standard.
I need to do some obvius things, like change the monitor to tft/lcd and change the power supply.
My doubt now is how to conect the controls. I have:
Analogs
1:Wheel1. W1
2:Wheel2. W2
3:Acelerator2. A1
4:Acelerator2. A2
5:Brake1. B1
6:Brake2. B2
Digitals
1:Gear up1. GU1
2:Gear down1. GD1
3:Gear up2. GU2
4:Gear down2. GD2
Start and some other buttons like views o actions buttons.
Let?s start with the analog controls, if we see the 26 pines (below), some are obvius other don?t.
Let me guess:
1-2 5v
3-4 W1 and W2.
5-6 Ground
7-8 Not Connected
9-10 A1 and A2
11-14 Not connected.
15-16 B1 and B2.
17-18 Not connected
19-20 5v, again.
21-22 What is this?
23-24 Ground
25-26 Not conected
Am I correct? Can be conection with 1 I/O a twin machine?
Sorry for my english...
Regards.
Analog IO (26pin JST RH connector)
----------------------------------------------------
01 (AVCC)
02 (AVCC)
03 (AD 0)
04 (AD 4)
05 (AGND)
06 (AGND)
07 NC
08 NC
09 (AD 1)
10 (AD 5)
11 NC
12 NC
13 NC
14 NC
15 (AD 2)
16 (AD 6)
17 NC
18 NC
19 (AVCC)
20 (AVCC)
21 (AD 3)
22 (AD 7)
23 (AGND)
24 (AGND)
25 NC
26 NC
Connecting a twin old Outrunner cabinet with a Chihiro (jvs)
Hi,
No you are wrong.
You have a twin machine but is the same as two individual machines, linked with a comunication cable.
You need two motherboards, two I/Os PCBS, two power Supplys, two monitors, two FFB PCBS, etc.
And if you want to connect them togheter, in case of Chihiro or Trifroce, a crossed ethernet cable or a small Ethernet HUB and two patch cables.
No you are wrong.
You have a twin machine but is the same as two individual machines, linked with a comunication cable.
You need two motherboards, two I/Os PCBS, two power Supplys, two monitors, two FFB PCBS, etc.
And if you want to connect them togheter, in case of Chihiro or Trifroce, a crossed ethernet cable or a small Ethernet HUB and two patch cables.
Thanks for your quick response. I have another question, what does it mean each pin of the analog conector?
I will use 2 I/O, but i need to know what is expecting the I/o in:
03 (AD 0)
04 (AD 4)
09 (AD 1)
10 (AD 5)
15 (AD 2)
16 (AD 6)
21 (AD 3)
22 (AD 7)
In principle, there are pins for 8 pots.
Thanks.
I will use 2 I/O, but i need to know what is expecting the I/o in:
03 (AD 0)
04 (AD 4)
09 (AD 1)
10 (AD 5)
15 (AD 2)
16 (AD 6)
21 (AD 3)
22 (AD 7)
In principle, there are pins for 8 pots.
Thanks.