Initial D and Naomi 2
Initial D and Naomi 2
Can I hook up the steering wheel and etc to a Sega I/O V2? (the black one)
fox1 wrote:Oh, so only something like this: http://page.auctions.yahoo.co.jp/jp/auction/159983059 ?
No, stick to the ones with 60 pin and 26pin connectors
like the 837-13551-92
AndyGeezer wrote:fox1 wrote:Oh, so only something like this: http://page.auctions.yahoo.co.jp/jp/auction/159983059 ?
No, stick to the ones with 60 pin and 26pin connectors
like the 837-13551-92
Cool ty. Also I was wondering if it was possible to hack up a USB wheel like http://www.amazon.com/Logitech-941-0000 ... 314&sr=8-1 for example and hook it up to the I/O board?
The only way to do that is to hack directly into the controls. You cannot connect a USB device to the I/O. Although the connectors used are the same, the connector on the I/O is JVS, not USB.
Hacking controls for driving games requires the wheel and pedals to use analog (potentiometers) controls, and take into account that Sega uses 5k pots (i believe) for steering and pedals.
Force Feedback is a different story; no go with a Logitech Wheel like the G27. Force Feedback on a Sega driver is accomplished through specific PCB's (in case of ID1,2,3 a Midi Motor Drive board) that is connected to the Naomi mobo.
Hacking controls for driving games requires the wheel and pedals to use analog (potentiometers) controls, and take into account that Sega uses 5k pots (i believe) for steering and pedals.
Force Feedback is a different story; no go with a Logitech Wheel like the G27. Force Feedback on a Sega driver is accomplished through specific PCB's (in case of ID1,2,3 a Midi Motor Drive board) that is connected to the Naomi mobo.