Hi,
I have Naomi Uni Cab with 6 buttons and Extra Loom for buttons 4-6
I bought this Namco original JVS > Jamma adapter (http://wiki.arcadeotaku.com/w/Namco_JVS ... MA_Adaptor)
And also a JAMMA PCB which has 4 buttons working from the board directly and buttons 5 and 6 have to be wired somewhere (probably to the Namco convertor pinout according to the Wiki) - photo (http://www.animecon.sk/cab/56button.jpg)
Any hints how to solve this?
NAOMI UNI + JVS > JAMMA + JAMMA PCB - adding buttons 5 &a
I'll try to be more exact, because you told me things I already knew.
Of course I want to connect the wires to the white PIN OUT 10 thing bellow the jamma harness cables. But I need the female part of the PIN OUT 10, where I put those wires in.
I don't know where to get that female part
BTW the manual below is of no use in this case.
Of course I want to connect the wires to the white PIN OUT 10 thing bellow the jamma harness cables. But I need the female part of the PIN OUT 10, where I put those wires in.
I don't know where to get that female part
BTW the manual below is of no use in this case.
That makes more sense. I did not gather that from your original post.
It looks like you could probably find a pretty generic molex connector that would work. Do you have a local electronics store?
Personally, while many people would think I'm crazy, I'd just solder to the pins or more preferably the under-side of the PCB if I couldn't find the female connector anywhere.
It looks like you could probably find a pretty generic molex connector that would work. Do you have a local electronics store?
Personally, while many people would think I'm crazy, I'd just solder to the pins or more preferably the under-side of the PCB if I couldn't find the female connector anywhere.