Naomi & all other arcade tech questions forum
OldFoo
Post
by OldFoo » Thu Jun 21, 2012 12:04 pm
I need to know does the capcom io give enough power that net dimm works on naomi and triforce?
OldFoo
Post
by OldFoo » Thu Jun 21, 2012 7:28 pm
how about normal dimm? can capcom io power that?
OldFoo
Post
by OldFoo » Thu Jun 21, 2012 9:25 pm
Don't do it. Capcom I/O will only power normal cart setup. the 3.3v converter in it can't handle DIMM boards, the system will crash. Get a SUN (NAOMI) PSU.
OldFoo
Post
by OldFoo » Sun Jun 24, 2012 9:11 pm
+1
OldFoo
Post
by OldFoo » Wed Jul 18, 2012 12:56 am
You CAN run the Capcom I/O with the Naomi 1 with the Net DIMM, but you cannot power the Naomi from the Capcom I/O.
Run power to the JAMMA connector for the I/O and run the Naomi from the Sun power supply. This is what i do when I run systems on my repair workbench.
OldFoo
Post
by OldFoo » Wed Jul 18, 2012 8:10 am
this is what i want to do but unsure how to get power to the SUN psu.Im in the UK so do i need to run it through a step down convertor?
OldFoo
Post
by OldFoo » Wed Jul 18, 2012 12:59 pm
The SUN PSU will have the input voltage listed by the model number. Mine is 100-120VAC so it would need the step-down. There may be some that accept your local voltage without a converter, not sure about that.
OldFoo
Post
by OldFoo » Thu Jul 19, 2012 3:14 am
so do i snip the connector off the 2 wires(black/white) and fit a usa plug to it then that goes to the step down convertor?
OldFoo
Post
by OldFoo » Fri Jul 20, 2012 4:37 am
That would work.
OldFoo
Post
by OldFoo » Fri Jul 20, 2012 11:40 am
thanks thats great.
just one more question-does it matter which wire goes where?