Dimm Board is not working

OldFoo · Post by **OldFoo** » Wed Sep 05, 2012 5:08 pm

Hello guys

i have 256mb net dimm board. I bought it and seller told me he tested the system and there is nı problem.

I put the board on naomi 2 but when the naomi 2 starting, there is an error

Error 01. this game is not acceptable with this board something.

I tried everything but nothing.

in the test menu it is writting, '' un known title ''

and i bought cf card, im trying to use with cf Card. İs there any jumper settings with cf card or something ?

Note: there is 2 jumper ın the dimm board. one of them on the top board another one on the bottom board.

please help me

thanks...

OldFoo · Post by **OldFoo** » Wed Sep 05, 2012 6:14 pm

and im testing the system with Supergun ( Sega Board Master )

i can play another card games, i tested marvel vs. capcom 2 and rival school 2

there is no problem. But with dimm board i have problem.

OldFoo · Post by **OldFoo** » Wed Sep 05, 2012 11:34 pm

the cf uses the same settings as any gdrom setup

OldFoo · Post by **OldFoo** » Thu Sep 06, 2012 8:57 am

werejag wrote:the cf uses the same settings as any gdrom setup

Thank for reply but,

i tried that unfortunately it is still not working.

in my naomi 2 bios is: EPR-23608B Export

i replug the dimm board again and again and tested it but nothing.

I think the dimmboard is dead, or there is another jumper settings maybe.

BCs on the dimm board there is too many jumpers ( bottom and top board )

OldFoo · Post by **OldFoo** » Thu Sep 06, 2012 10:01 pm

This guy http://www.sega-naomi.com/forum/viewtopic.php?t=5988 is having the same problem, I think. Both of you are trying to use the cf/gdrom with a jamma supergun.

OldFoo · Post by **OldFoo** » Sat Sep 08, 2012 5:33 am

To use the CF card setup, you need the 4.01 software version. Verify what is your current Dimm version.