Sega-Naomi

i dismantled cabinet to clean it up and it has no sound anymore. could someone please help me on what to do? thanks.

I'm not sure if it's the same type of cab, but have you read this post? --->Sound problem<---

its not the same problem.



i posted this problem on other sites as well.



quick rundown:



1. dismantled cab

2. sound doesnt come on

3. check connectors to speakers and to naomi amp (looks good)

4. check fuses on naomi amp (tests fine)

5. changed i/o board (non jamma) sound worked but couldnt adjust sound from volume control on cabinet.

6. after awhile sound slowly got softer and softer till it was gone.



do you have any insights on this?



thanks.

borg07of09 wrote:its not the same problem.



I posted this problem on other sites as well.



quick rundown:



1. dismantled cab

2. sound doesnt come on

3. check connectors to speakers and to naomi amp (looks good)

4. check fuses on naomi amp (tests fine)

5. changed I/o board (non jamma) sound worked but couldnt adjust sound from volume control on cabinet.

6. after awhile sound slowly got softer and softer till it was gone.



do you have any insights on this?



thanks.

Did you change from US to JP harness?



If so you need to hook up header from US harness

(but then you cannot degaus)



You have to hack the two harnesses together. Never did it. not sure how

Could be a pot error, I had an issue with a volume pot, that the sound would briefly work, then fade out..



The pot was fautly.

problem solved. traced 4 wire jst connector from amp. i had the japanese one connected and not the us one for the sound. yes skidog i did change to the japanese harness and just connected the one with the japanese harness without thinking.



thanks everyone for your help though.