Hi,
I'm trying to fault find a Naomi2 system (from cycraft simuline with Initial D and the cart race game???)
ATM the system (MoBo, Comms & ROM) has no VGA or sound and the network seem dead. The PSU appears OK (all voltages present and correct)
I initially found the 7v2 battery and 3v coin cell were both flat (cell replaced and battery charged)
Should I see anything out of the VGA with just main board powered?
TIA
Bill
Fault finding Naomi2
Re: Fault finding Naomi2
BillTodd2011 wrote:
Should I see anything out of the VGA with just main board powered?
TIA
Bill
yes, you should see a naomi startup screen.
Well that's fixed. Replaced the main board and screwed everything into place into the back of the Cycraft (not easy, as access to the back of the machine is/was negligible)
Nearly lost my lunch testing it! Boy, do these things throw you around :smt005
The machine has a battery backed DIMM board that saves considerable loading time but, since it often sits idle for weeks or even months on end it often flattens the battery then reverts back to the GDROM
I'm wondering about a flash drive. Would there be any advantages to these ?
Bill