Check your NAOMI system!

OldFoo · Post by **OldFoo** » Mon Aug 18, 2008 5:35 pm

Parris wrote:
I'd like the exact model number too as it might also be that the additional wire causes too much of a drop for them to function properly.

Exact replacement (0.1F/5.5V):

http://uk.farnell.com/9692673/passives/ ... ecs0hd104h

The same supercap is found on CPS2 mobos but vertical mount:

http://uk.farnell.com/9692665/passives/ ... ecs0hd104v

OldFoo · Post by **OldFoo** » Mon Aug 18, 2008 6:18 pm

i never fixed anything changing a cap, there is allways another thing fucked if a cap is faulty

OldFoo · Post by **OldFoo** » Tue Aug 19, 2008 3:31 am

Alveida wrote:I never fixed anything changing a cap, there is allways another thing fucked if a cap is faulty

Yup. Those things leak some NOXIOUS stuff that likes to eat traces.

Cornell Dublier cap, part # EDLSD104H5R5C, available through Mouser.com is a perfect fit.

EDLSD104V5R5C is the vertical counterpart. Dunno if it'll fit CPS2 yet as I haven't checked those.

http://www.cde.com/catalogs/EDL.pdf is the spec sheet if you want to take mesurements on the board to see if they'll fit. These are the SD series caps.

I'll have the NAOMI fitting ones up on my website at $1.99ea too since I ordered a bunch.

RJ

OldFoo · Post by **OldFoo** » Tue Aug 19, 2008 7:00 am

Have 2 or 3 non working mobos. I will have a look.