Need help connecting Virtua Golf CP - STILL NEED HELP!!

OldFoo · Post by **OldFoo** » Tue Oct 28, 2008 2:34 am

Okay.

I have the USB cable connected (correctly, I believe.)

I have the two wiring connectors connected (also correctly, I believe.)

However, here's the error that I get:

I/O BD IS NOT CONNECTED TO NAOMI BD.

I don't know what this is referring to.

If anyone can help here, I'd greatly appreciate it.

OldFoo · Post by **OldFoo** » Tue Oct 28, 2008 2:40 am

Something is either shorted or disconnected. Without checking it out myself, I couldn't say what exactly is the problem. If you have a meter, you need to check all connections. Since you haven't mentioned it, you need to also refer to the manual and wiring diagrams to make sure you made the right connections. This is all basic troubleshooting steps, things we can't do for you.

OldFoo · Post by **OldFoo** » Tue Oct 28, 2008 8:41 am

Have both I/O boards got +5V?? Check the lights to make sure they are getting power.

OldFoo · Post by **OldFoo** » Tue Oct 28, 2008 11:47 am

This is my earlier thread about getting it to work on an European Universal. Not sure if it is different with you.

http://www.sega-naomi.com/forum/viewtop ... ight=#9612

OldFoo · Post by **OldFoo** » Tue Oct 28, 2008 2:50 pm

AndyGeezer wrote:Have both I/O boards got +5V?? Check the lights to make sure they are getting power.

There is a red light on both the trackball I/O and the Naomi mobo I/O.

OldFoo · Post by **OldFoo** » Tue Oct 28, 2008 2:52 pm

finngamer wrote:This is my earlier thread about getting it to work on an European Universal. Not sure if it is different with you.

http://www.sega-naomi.com/forum/viewtop ... ight=#9612

Thanks for the link.

These are exactly the same messages I've gotten. The first one was before I connected the USB.

The second after I connected the USB.

The only difference is, I have a US wiring loom in the cabinet already, and the CP has US connectors.

I would think it would be pretty simple. But, I certainly don't profess to know what I'm talking about...

OldFoo · Post by **OldFoo** » Tue Oct 28, 2008 6:18 pm

why not post some pics of how you have it connected,perhaps one of us will notice something

OldFoo · Post by **OldFoo** » Wed Oct 29, 2008 8:33 am

I really don't understand the issue you guys would be having..

Try this

USB Cable from Naomi to the Trackball I/O (V-Golf I/O) then the daisy chain the main I/O.

This should 100% work, you have to-do the same on Outrigger (if my memory serves me right!)

OldFoo · Post by **OldFoo** » Wed Oct 29, 2008 2:58 pm

I thought the trackball I/O only had the one USB port. :smt017 The VG manual shows this order: Trackball controller->Trackball I/O->Naomi I/O->Naomi mobo. The manual also shows a JVS I/O (not jamma), if that matters at all.

OldFoo · Post by **OldFoo** » Wed Oct 29, 2008 3:06 pm

joshua3dg wrote:I thought the trackball I/O only had the one USB port. :smt017 The VG manual shows this order: Trackball controller->Trackball I/O->Naomi I/O->Naomi mobo. The manual also shows a JVS I/O (not jamma), if that matters at all.

Yes your right..

http://triplemoonstar.brinkster.net/seg ... ockid=2068

You know if things are correct:

Go into the test menu

Go to JVS I/O

First Node should be 837-13551

When you goto the next node it should be

837-13938

TBH Can't see why people are having trouble, providing both I/Os have +5V and are connected they should be 100%

Second Node should be 837-